Friday, October 28, 2022

Hello Fall Coffee Cup Wraps

Happy fall! Today I'm sharing a tutorial over on the Thermoweb blog to make these coffee cup wraps using the Hello Fall collection by Jessica Flick for Benartex. You can find the full tutorial for the single fabric wrap here.

Below are the steps to make a pieced wrap. You can also watch the video tutorial for this here.

Step 1: Trace the full coffee wrap shape onto a piece of muslin. 
Step 2: Position the first strip right side up so it covers the left end of the traced shape. Position the second strip right side down on top. Stitch through all layers using a 1/4" seam allowance from the edge of the strips.

Step 2: Press the second strip open.

Step 3: Position a third strip, right side down. Angle it slightly as shown, but make sure it covers the edge of the second strip. Stitch in place, using a 1/4" seam allowance along the edge of the third strip.

Step 4: Fold back the muslin and trim the excess strip as shown.

Step 5: Press the third strip open. 

Step 6: Position the fourth strip, again angling it slightly as shown.

Step 7: Continue adding and trimming strips in this manner until the entire wrap shape on the muslin is covered.

Step 8: Flip the pieced unit over and position the Fusible Fleece piece on the back, making sure the pieced strips extend beyond it on all sides. Fuse in place.

Step 9: Machine quilt the strips in place as desired. Trim 1/4" past the fleece shape. Follow the remaining steps in the tutorial to complete the coffee cup wrap.

And you're done!

And one more last thing...
If you're new here, welcome! I hope you'll stay and look around a bit. 
If you like what you've seen here, you can also find me:
To find all of my quilt patterns, visit my Etsy shop
Find me on IG here.
Sign up for my newsletter in the right-hand sidebar or here
(You'll receive a free pattern for my Diamond Drama quilt (below) as a thank you!)


1 comment:

  1. Thank you for the coffee cup wraps tutorial. 'Need to make a few of those.